Top 10 DIY Clock Mechanism Kit – Clock Movements

As an Amazon Associate I earn from qualifying purchases.

1. Mudder

#ad

Mudder 31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit Black

#ad
Mudder #ad - 120 mm 4. 7 inch; Second caps is approx. 7 mm 028 inch; please check the size before buying. Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs.

Movement size: shaft length is 31 mm 1-1/ 5 inch; thread length is 24. 6 mm 24/ 25 inch; jump second movement, suitable for 16 - 21 mm 5/ 8 - 4/ 5 inch thickness clock panel. Wide application: they are fit for cross-stitch, three-dimensional embroidery, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, craft clock, etc. Center of hole hand size: hour hand is approx. Warm notice: when you install it, please keep the hour hand and minute hand parallel. 90 mm 3. 5 inch; minute hand is approx.
BrandMudder #ad
ManufacturerMudder #ad
Weight0.09 Pounds
Part Number43216-77972

2. TIKROUND

#ad

59/64 Inch Total Shaft Length., Youngtown 12888 Quartz DIY Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement,1/ 2 Inch Maximum Dial Thickness

#ad
TIKROUND #ad - High torque "i" shaft clock movement:suitable for suitable for 9-13 mm 23/64 - 1/2 inches thickness clock panel. Long spindle quartz clock replacement movement parts with metal hook, Good for repairing, replacing or making a clock.

Parameter: "i" shaft, drive long clock hands 10 mm to 450 mm; Total shaft length is 23. 5mm59/64 inch, thread length is 16mm5/8 inch. Young town manufactures the 12888 series in various models, makesure the existing shaft and threads before ordering and you will get the right replacement. Applicable to cross-stitch, craft clock, three-dimensional embroidery, frameless draw clock, etc. Instructions - Included along with the movements.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberTIKROUND-M-040
ModelTIKROUND-M-040

3. Outus

#ad

2 Pieces Quartz Clock Movement Mechanisms Non Ticking Clock Mechanism with 8 Clock Hands Sets of DIY Movement Kits Replacement 13 mm

#ad
Outus #ad - Clock design: the design of the clock hands are simple and stylish which have a various styles; The long-axis clock mechanism provides accuracy and reliability, and there is no ticking sound provides you with a quiet environment. Size: the total shaft length is approx.

Widely applicable: these clock repair replacement parts are suitable for cross-stitch, frame-less wall clocks, craft clocks, 3 dimensional embroidery, especially for DIY quartz wall clock to replace for using.6 mm/ 024 inch; the clock movement mechanism are suitable for 1 - 3 mm/ 004 - 012 inch thickness of clock panel, when you install this clock movement kit, please check the sizes. Package includes: you will get 2 pieces clock quartz movement mechanisms with 2 sets of accessories, and 8 sets of different pointer kits; There are various styles to choose which is very suitable for different styles of clock frames.

Quality material: the movement is made of abs material, which is light in weight and corrosion-resistant, and the clock hands are made of quality aluminum, sturdy for a long time to use, providing you with nice use and decorative effect.13 mm/ 05 inch, and clock hands fit clock face 25 - 35 cm in diameter, and the thread length is approx.
BrandOutus #ad
ManufacturerOutus #ad
Part NumberOutus-1338
ModelOutus-1333

4. AILILIFE

#ad

3D Wall Clocks Home Decor, Aililife 3D Clock Hands, DIY Large Clock Movement Mechanism with 12 Inch Long Spade Hand

#ad
AILILIFE #ad - Silence movement - silent sweeping, mute movement 3d clock hands will give you a quiet night. Our service: we believe you will love this 3d clock hands, If there is any problems, please feel free to contact us.

Our friendly customer service will be always with you whenever you need our technical support. Main function - applicable to cross-stitch, craft clock;suitable for quartz clock repairing, three-dimensional embroidery, replacing or making a clock£¬Large clock hands also can be used as a wall decoration. Unique design - 3d clock hands fit clock dial over 25" diameter, easy and simple design with mute scanning movement, Introducing from high-technology which maximum reducing power consumption and effectively extending the life of the movement.

No harm to the environment and health. Enjoy the diy - 3d clock hands has an open design with just minute and hour hands. You can design your clock and room according to your habits, or share your design process with friends and family.
BrandAILILIFE #ad
ManufacturerAililife #ad
Weight0.6 Pounds

5. Outus

#ad

Black, 4 Pieces Quartz Clock Movement Mechanism Non Ticking DIY Clock Mechanism with 6 Clock Hands Sets for Repair Parts Replacement 18 mm, Gold

#ad
Outus #ad - 18 mm/ 071 inch, and the thread length is approx. Widely applicable: these clock replacement parts can be applied in office, living room, library and other occasions, craft clocks, bedroom, frameless wall clocks, and also suitable for cross-stitch, classroom, restaurant, quartz wall clock to use.

Size: the total shaft length is approx. 11 mm/ 043 inch; the clock movement mechanism are suitable for 4 - 7 mm/ 016 - 028 inch thickness of clock panel, and clock hands fit clock face 25 - 35 cm in diameter; Please keep the hour hand and minute hand parallel when you install this clock movement kit. Package includes: you will get 4 pieces quartz clock movement mechanisms with 4 sets of accessories, and 6 sets of different pointer kits; There are various styles to choose, which is very suitable for different styles of clock frames. Quality material: the movement is made of abs material which is sturdy and durable for a long time, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant to provide you with nice use and decorative effect.

Clock design: the design of the clock hands are simple and fashionable which have a various styles, and and there is no ticking noise to interrupt your work or rest, and the color is classic and does not fade; The long-axis clock mechanism provides accuracy and reliability, providing you with a quiet environment.
BrandOutus #ad
ManufacturerOutus #ad
Part NumberOutus-1355

6. Hicarer

#ad

Hicarer DIY Large Clock Hands 3D Wall Clock for Kitchen Office and Home Art Decor Quartz Clock Movement Mechanism Accessories

#ad
Hicarer #ad - 7 mm/ 03 inch,please check the size before purchase. Material: the clock pointer is made of aluminum, please do not use too much pressure to avoid bending.

Center of hole hand size: the hour hand is approx. Home decoration: you can diy a simple clock as wonderful decoration, kitchen, then hang and stick it on the wall in bedroom, living room or office. 70 cm/ 30 inch. Kindly reminder: there is only one minute hand and one hour hand; After putting battery in, you must spend 5 minutes to test the clock move or not; Powered by 1 x 1. 5 v aa battery not included. Size: you can apply the clock movement kit to DIY a wall clock, and its mini size is approx. 203 mm/ 8. 0 inches long; the minute hand is about 305 mm/ 12 inches in length; Second cap: approx.
BrandHicarer #ad
ManufacturerHicarer #ad
Height0.79 Inches
Length16.73 Inches
Width3.94 Inches
Part NumberHicarer-Clock Movement-01

7. Mudder

#ad

1-1/10 Inch Total Shaft Length, 3/5 Inch Maximum Dial Thickness, Mudder Long Spindle Quartz Clock Movement

#ad
Mudder #ad - Size: total shaft length: 28 mm 1-1/ 10 inches, thread length: 204 mm 4/ 5 inches; jump second movement, suitable for 12 - 16 mm 12/ 25 - 5/ 8 inches thickness clock panel.

Note:please check the size of the clock movement and pointer below prior to purchase to verify whether it can fit over your clock. Good handwork diy clock material: suitable for repairing, replacing or making a clock, replacement for large and thick clock frame. Compatible clock: applicable to cross-stitch, frameless draw clock, craft clock, three-dimensional embroidery, etc. Delicate design: black water drop shape, it looks elegant, simple, replacement part suit well to different styles clock frame. With metal hook: long spindle quartz clock replacement movement parts with metal hook, it can be hung on the wall via nail directly.
BrandMudder #ad
ManufacturerMudder #ad
Height0.63 Inches
Length2.17 Inches
Weight0.15 Pounds
Width2.17 Inches
Part NumberHK00E4725
Model8541847135

8. AILILIFE

#ad

Aililife 3D DIY Wall Clock Decor Sticker Mirror Frameless Large DIY Wall Clock Kit for Home Living Room Bedroom Office Decoration Gold

#ad
AILILIFE #ad - Satisfaction service -please feel free to contact us through amazon email if there is any issues, our customer team will make a satisfactory solution in 24 hours. Easy to install - diy clock kit includes self-adhesive stickers and auxiliary scale ruler for easier installation; the wall clock numbers and hands have a protect film, please tear it off after installation.

3d effect numbers - clock with large size and acrylic mirror surface, this 3D DIY wall clock will let your room get a modern wall decoration. Self-adhesive, water and steam resistant, office etc. The large diy wall clock finishing size is depends on your preference to decorate your wall. Enjoy the silence - silent sweeping, suitable for smooth walls of living room, dining room, kids bedroom, mute movement diy clock will give you a quiet night.

No harm to the environment and health. Funny diy - design the position and size of the DIY wall clock as you like while enjoying the fun of DIY with your family and friends. You will definitely like your own design. Introducing from high-technology which maximum reducing power consumption and effectively extending the life of the movement.
BrandAILILIFE #ad
ManufacturerAililife #ad

9. TIKROUND

#ad

Youngtown #12888 Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement Kit Sweep Silent Movement Black Shaft,3/8 Inch Maximum Dial Thickness, 43/64 Inch Total Shaft Length.No Hands

#ad
TIKROUND #ad - Movement suitable for 2-6 mm 5/64 - 15/64 inch thickness clock panel. Good for repairing, replacing or making a clock. Applicable to cross-stitch, frameless draw clock, three-dimensional embroidery, craft clock, etc. Youngtown manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions. Package contents: a clock movement, a Brass washer and a Brass nut, a Plastic washer, come with the specially designed protect box and instructions. Movement total shaft length is 17mm 067 inch, thread length is 9. 5mm037 inch.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberTIKROUND-M-058

10. Mudder

#ad

3 Pieces High Torque Long Shaft Clock Movement Mechanism Quartz Clock Motor Kit with 5 Different Pairs of Hands Clock Repair Parts Replacement Accessories

#ad
Mudder #ad - Accurate and quiet: the long shaft clock mechanism offers great accuracy and dependability, equipped sweeping motion allows for no ticking so as to provide you with a quiet environment. 14. 6 mm/ 057 inches; jump second movement is suitable for 9 - 13 mm/ 035 - 051 inches thickness of clock panel.

Scope of application: these clock repair replacement parts fit for cross-stitch, frame-less draw clock, three-dimensional embroidery, craft clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts. Size details: the total shaft length is approx. 20 mm/ 08 inches, and the thread length is approx. What you will get: package includes 3 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.5

5 different styles and lengths of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
BrandMudder #ad
ManufacturerMudder #ad
Part NumberMudder-Élevé Moteur-t-5510