Top 10 Chair Leg Glide Protectors – Kitchen & Dining Features

As an Amazon Associate I earn from qualifying purchases.

1. Project Patio

#ad

End Cap Insert Cup Sliders, Project Patio 1-1/2" Wrought Iron Patio Furniture Feet Glides and Outdoor Chair Leg Floor Protectors, 24 Pack

#adProject Patio #ad - Before installing. Installation - the furniture leg caps install by using a rubber hammer or mallet. See images. Relief - after installing these replacement leg caps, expect the smoother movement of your lawn furniture and say goodbye to that screeching sound every time you move a table or chair.

Please measure and confirm your size before ordering! Protects - our non-scratching outdoor table and chair leg protectors will prevent scratches and damage to your surface. Quality - the patio furniture feet are thick, UV-resistant plastic designed to withstand the outdoor elements. They also stop rust marks from staining your flooring. Remove any dirt, debris, rust, etc. Is this the size you need? these are not a universal fit! These glides install inside wrought iron furniture feet cups with a 1-1/2" inside diameter.

Brand	Project Patio #ad
Manufacturer	Project Patio #ad
Height	0.65 Inches
Length	1.7 Inches
Weight	0.24 Pounds
Width	1.5 Inches
Part Number	DeluxeCap1.5
Model	Deluxe

2. APPLIANCEMATES

#ad

24 Pack Wrought Iron Patio Furniture Glides 1-1/2 inch Outdoor Chair Leg Feet Protector Deluxe Version Round Chair Table Leg Caps Replacement Protect Outdoor Patio Floor from Scratches Black

#adAPPLIANCEMATES #ad - Fits oem standards! for any reason that you're not satisfied, you can ask for a replacement or full refund. Tipspatio furniture leg cap size reference 1-1/2" 1. 5 inches is to the size of the “cup” inside diameter on the bottom of the chair or foot area where the glide should be installed.

Package includes24 outdoor patio furniture chair glides cap replacement pieces. 2 clean the position of the glides. Item specificationchair glides cap approx 1-1/2" in diameter, thickness 008", and 05" height, flexible plastic and clear. Installation1 use a flat-head screwdriver to pry out the broken old cap.

Or you can hold them in place with one hand and using a crescent wrench with he other. Quality warrantythe replacement part is made from durable high quality material and well-tested by manufacturer. 3 align the new caps with the opening and tap it with rubber mallet. These glides fit very snugly into a cup size. Be made of high-quality outdoor-ready plastic.

Brand	APPLIANCEMATES #ad
Manufacturer	APPLIANCEMATES #ad
Height	0.39 Inches
Length	0.39 Inches
Width	1.5 Inches
Part Number	B-Patio Glides-24

3. AR-PRO

#ad

1-1/4"Inside Diameter Patio Chair Glides Replacement 48-Pack for Outdoor Wrought Iron Furniture Legs-The Ultimate Protection to Help Shield Both Furniture and The Floor-for Up to 12 Chairs/Tables

#adAR-PRO #ad - Our replacement glides are perfect for wrought iron furniture that have 1. 14-inch inner diameter, 1 1/4” outside diameter on the bottom of the feet for less cost from the OEM yet is made of premium, heavy duty plastic, improving the part’s life span by at least 50%.

It takes less than 1 minute to replace one chair. Easy installation: the only tool you might need is a flat head screwdriver that removes the old, broken ones from the furniture, please do not use hammer when installing the replacement. Value-pack: you are getting 48 packs from the package, which is the best value on market right now. Please double check the size. 40 day money back - any reason you are not happy with your purchase? No problem, we offer 40-day money back policy so you can shop with worry free! Please make sure to measure the actual furniture before your purchase.

Our 48-pack is good for up to 12 chairs or tables. Don’t wait! replace the worn-out glides today to help shield both furniture and the floor. The glides tend to break over time so it’s good to have spare units on hand whenever needed.

Brand	AR-PRO #ad
Manufacturer	AR-PRO #ad

4. FCOUIID

#ad

Wrought Iron Chair Glide Protector, Patio Outdoor Furniture Table Feet Leg Cap 1-1/2" Diameter Replace Accessories 16pcs

#adFCOUIID #ad - Perfect alternative to the forever glides, no need adhesive to stay in so these last longer, easy installed using a rubber mallet. These durable leg cushions will last for seasons to come.

Please measure your inside diameter before you purchase the correct size. Not have to replace it as often. Wrought iron chair glides fit into the "cup" area of your outdoor furniture feet with a inside diameter of 1-1/2". Say goodbye to nasty scratches on your patio floors. Very thicker than the standard, keep the floors protected, provide the much-needed cushion to protect your floors from permanent damage. Perfectly fit the leg of most patio chairs and stools 1. 5” and prevent moisture build-up that may cause rust on your wrought iron tables or chairs. 16 pcs of patio chair glides is enough for 4 chairs with 4 legs each.

Brand	FCOUIID #ad
Manufacturer	FCOUIID #ad

5. Project Patio

#ad

24 Pack, Project Patio 1-1/2" Wrought Iron Patio Furniture Feet and Outdoor Chair Glide Leg Protector Cap Inserts

#adProject Patio #ad - Installation - easy to install with no adhesive needed. Use a rubber hammer or mallet to install the chair caps. See images. Relief - after installing these replacement leg caps, expect the smoother movement of your lawn furniture and say goodbye to that screeching sound every time you move a table or chair.

They also stop rust marks from staining your flooring. We highly recommend cleaning the inside of the cup before installation. Is this the size you need? these are not a universal fit! These glides install inside wrought iron furniture feet cups with a 1-1/2" inside diameter. Quality - the patio furniture feet are a thick, UV-resistant plastic designed to withstand the outdoor elements. Please measure and confirm your size before ordering! Protects - our non-scratching outdoor table and chair leg protectors will prevent scratches and damage to your surface.

Brand	Project Patio #ad
Manufacturer	Project Patio #ad
Height	0.65 Inches
Length	1.7 Inches
Width	1.5 Inches
Part Number	DeluxeCap1.5White
Model	DeluxeCap1.5White

6. Sunniland Patio

#ad

1/2" Nylon Stem Bumper | Glides | Floor Protectors for Patio Swivel Chairs | Pack of: 25 Natural White

#adSunniland Patio #ad - Stop the screech!! provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio. Glide installs inside the holes on the round base of swivel chairs.

Be sure to measure the inner diameter of the hole to purchase the correct glide. Shaft refers to part that fits up into frame is 3/16" long. If your hole is smaller- use 15/64" drill bit to open hole to size or if it is a little larger- try using a small amount of silicone adhesive to hold in place. Protects your patio surface, patio chair feet and patio legs from damage. These stem bumper chair glides fit a 15/64" diameter hole on patio furniture swivel rockers. Base actual part touching floor is 1/2".

Brand	Sunniland Patio #ad
Manufacturer	Sunniland Patio #ad
Weight	0.04 Pounds
Part Number	SP-30-611

7. Zipcase

#ad

32 Pack of 1.5" Deluxe Wrought Iron Outdoor Patio Furniture Chair and Table feet Cup Glide Protectors Smooth Move

#adZipcase #ad - What you get - 32 packs glide protector ; 90 days hassle free replacement or refund, please contact us if you need any help and we will reply you ASAP. Attention - our wrought iron chair glides have a diameter of 1.

5” that fits most pieces of patio furniture and can be installed using a rubber hammer or mallet, measure the inner diameter of the cup before ordering and scrape away any worn metal or remains of old cap before measuring. Plenty package - each group of products contains 32 furniture cap replacement pieces. Patio surface protector - the glide protector provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio and protects your patio surface, patio chair feet and patio legs from damage. Premium material - made of high quality PA66 nylon material, the cap insert are thicker and more durable than other standard caps.

Brand	Zipcase #ad
Manufacturer	Zipcase #ad

8. Sunniland Patio

#ad

1 1/4" Deluxe Wrought Iron Chair Glide Quantity 16 Black

#adSunniland Patio #ad - Important-always scrape away any worn metal or remains of old cap- Before measuring and installing. Specific fit for 1. 25" inside diameter cup on patio furniture feet.

Protects your patio surface, patio chair feet and patio legs from damage. Please feel free to contact us if you have any questions about sizing. Be sure to measure the innER diameter of the cup area to purchase the correct glide. 1. 25" glide installs inside the metal cup on the bottom of the chair or table. Provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio. Please measure inner diameter of opening -to be sure it is exactly 1 1/4" before ordering.

Brand	Sunniland Patio #ad
Manufacturer	Sunniland Patio #ad
Part Number	.
Model	.

9. mkki

#ad

Mkki 7pcs Hammock Chair Anti-Friction Pad Plastic Slider Glide Pad Floor Protector for Hanging Basket Chairs Hammock Leg Feet Base

#admkki #ad - Quality material-high quality nontoxic ABS plastic. Multifunction-anti-slip, prevent from marring and scratches, reduces friction vibration & noise while moving Hammock Chair and lengthen the life of them & floor. Advantages-lasts far longer pads and easier replacement. Easy use-easily mounted onto bottom of Hammock Chair.

Brand	mkki #ad
Manufacturer	xp #ad

10. Project Patio

#ad

Black, Project Patio Stem Bumper Feet Glide Protectors for Outdoor Swivel Rocker Chairs, 25 Pack

#adProject Patio #ad - 5/16" deep. They will not fit into larger holes. The package includes 25 stem bumper furniture feet glide inserts. Base height/thickness = 3/16". See the product images for a visual of the measurements.

These replacement parts protect your outdoor surface from scrapes and damage. They also make moving your patio furniture easier. Inserts into the frame approx. Base diameter = 1/2" width of the portion that touches the floor. Get rid of that screeching sound every time you move your chair. Sizing - shaft diameter = 1/4" the smaller diameter part that goes into the frame. These chair feet are made with non-skid and non-marking nylon. Important - fits into a 15/64" diameter hole on the bottom of an outdoor swivel rocker chair's circular base. It is usually possible to drill new 15/64" holes next to the ones already there.

Brand	Project Patio #ad
Manufacturer	Project Patio #ad
Height	0.5 Inches
Length	0.25 Inches
Width	0.5 Inches
Part Number	SB25-B
Model	SB25-B