Olson Saw PG49802 Precision Ground Scroll Saw Blade

Longest lasting 3 to 4 times the cutting life. Double tooth for top performance in hardwoods. Sharpest, fastest cutting teeth. Most accurate scroll saw blade ever made. Most accurate scroll saw blade ever made. Reverse teeth for clean, sharp edges on top and bottom surfaces and sand free finish. Used and endorsed by scroll experts.

Double tooth for top performance in hardwoods. Sharpest, fastest cutting teeth.

---

WEN 3920 16-Inch Two-Direction Variable Speed Scroll Saw with Flexible LED Light

Variable speed goes from 400 to 1600 strokes per minute. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece.

Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. Remember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. And because its a wen product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.

On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Features a cast iron base, dust port, foot lock clamp, onboard storage, flex light, air pump, and three blades. Unique design accepts blades in two directions standard and 90 degrees to allow for infinite ripping capacity.

The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for angled cut. The 9/16-inch stroke saws through hard woods up to two inches thick. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees.




Similar products

---

Olson Saw FR49501 Pin End Scroll Saw Blade

Cuts in hard/soft wood and plastic. For machines that require 5" pinned blades. Unique design accepts blades in two directions standard and 90 degrees to allow for infinite ripping capacity. The product is manufactured in USA. Contains 6 each of fr42401, sc41101 and SC41201. The product is easy to use and highly durable.

Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts. Perfect for sears craftsman, ryobi, Penn State, Delta, all 15" and 16" imported scroll saws. Variable speed goes from 400 to 1600 strokes per minute. Features a cast iron base, onboard storage, flex light, dust port, foot lock clamp, air pump, and three blades.

The product is Easy installation and easy handling. Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position. For machines that require 5" pinned blades.


Similar products

---

Olson Saw SP46500 Spiral Scroll Saw Blade

Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts. Cutting speed and finish depend on material thickness and number of teeth per inch. These premium blades are made of high carbon steel, hardened and tempered to stay sharp longer. The product is manufactured in USA. Cutting speed and finish depend on material thickness and number of teeth per inch.

Contains 6 each of fr42401, sc41101 and SC41201. Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position. These premium blades are made of high carbon steel, hardened and tempered to stay sharp longer. For machines that require 5" pinned blades. These blades saw in all directions and have 360 cutting capability.

Good for bevel cutting letters in names. For use in power scroll saws and hand-held fret and jewelers saw frames. Use for cutting all types of materials including wood, plaster, plastic, wax, horn, bone, non-ferrous metals, etc. Variable speed goes from 400 to 1600 strokes per minute. These blades saw in all directions and have 360 cutting capability.

Features a cast iron base, onboard storage, air pump, flex light, dust port, foot lock clamp, and three blades.


Similar products

---

Olson Saw FR49400 Skip Tooth Scroll Saw Blade Assortment

These blades saw in all directions and have 360 cutting capability. Features a cast iron base, foot lock clamp, onboard storage, air pump, flex light, dust port, and three blades. The product is Easy installation and easy handling. These premium blades are made of high carbon steel, hardened and tempered to stay sharp longer.

Available in more sizes than any other type of Olson scroll saw blade. Contains 6 each of fr42401, sc41101 and SC41201. Skip tooth blades cut fast, provide good. The product is manufactured in USA. Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts. For machines that require 5" pinned blades.

For hand or machine sawing of wood, plastic and fibrous materials. Skip tooth blades are available in more sizes than any other type of Olson scroll saw blade. Variable speed goes from 400 to 1600 strokes per minute. For hand or machine sawing of wood, plastic and fibrous materials. Skip tooth blades cut fast, provide good chip clearance and smooth finishes.

Unique design accepts blades in two directions standard and 90 degrees to allow for infinite ripping capacity. The product is easy to use and highly durable.


Similar products

---

DEWALT DW788 1.3 Amp 20-Inch Variable-Speed Scroll Saw

Available in more sizes than any other type of Olson scroll saw blade. Stand Not Included. Depth of Cut inches: 2 in. Table size 16" x 23-3/4". On-off switch, electronic variable speed, flexible dust blower, and blade-tensioning lever all located on front upper arm. Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation.

Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm.400-1, 750 cutting strokes per minute. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts.

Contains 6 each of fr42401, sc41101 and SC41201. Exclusive tool-free blade clamps allow blade changes in seconds. Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts. Weighs 56 lbs. Unique design accepts blades in two directions standard and 90 degrees to allow for infinite ripping capacity.

The product is easy to use and highly durable. Meets osha standards, CSA approved and U.


Similar products

---

Flying Dutchman New Spiral Five Dozen Scroll Saw Blade Variety Pack

With teeth down both sides of the blade and then twisted, it gives a smoother cut than regular spiral blades. The flying dutchman new spiral five dozen scroll saw blade Variety Pack includes one dozen of each of the following blade sizes: #3/0, #2/0, #1, #3, and #5. For hand or machine sawing of wood, plastic and fibrous materials.

Cutting speed and finish depend on material thickness and number of teeth per inch. Arm lifts so blade can be easily threaded through the material for inside cuts. For machines that require 5" pinned blades. Exclusive tool-free blade clamps allow blade changes in seconds. These blades saw in all directions and have 360 cutting capability.

Cuts in hard/soft wood and plastic. The flying dutchman new spiral five dozen scroll saw blade Variety Pack includes one dozen of each of the following blade sizes: #3/0, #2/0, #3, #1, and #5. The product is manufactured in USA. Flying dutchman scroll saw blades are 5" long and pinless. Milled blades, which makes a sharper cutting edge.

Manufactured in Germany with top-grade high-quality hardened steel. The newly designed new spiral blades are an excellent spiral blade.


Similar products

---

Scroll Saw Workbook, 3rd Edition: Learn to Master Your Scroll Saw in 25 Skill-Building Chapters Fox Chapel Publishing Ultimate Beginner's Guide with Projects to Hone Your Scrolling Skills

By the time you've completed the book, you'll be ready to tackle any scroll saw project with experience and confidence. Begin with the basics of cutting straight, and jagged lines, segmentation, compound, and then progress to more advanced techniques like stack cutting, inlay, relief, curved, and more.

Available in more sizes than any other type of Olson scroll saw blade. Features a cast iron base, air pump, onboard storage, dust port, flex light, foot lock clamp, and three blades. The product is Easy installation and easy handling. For hand or machine sawing of wood, plastic and fibrous materials. Flying dutchman scroll saw blades are 5" long and pinless.

Milled blades, which makes a sharper cutting edge. Manufactured in Germany with top-grade high-quality hardened steel. The newly designed new spiral blades are an excellent spiral blade. Unique design accepts blades in two directions standard and 90 degrees to allow for infinite ripping capacity. On-off switch, electronic variable speed, flexible dust blower, and blade-tensioning lever all located on front upper arm.

Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation. These blades saw in all directions and have 360 cutting capability.


Similar products

---

Flying Dutchman Five Dozen Scroll Saw Blade Variety Pack

Flying dutchman blades are manufactured in Germany with top-grade, high-quality hardened steel. Available in more sizes than any other type of Olson scroll saw blade. Flying dutchman scroll saw blades are 5" long and pinless. Milled blades, which makes a sharper cutting edge. Manufactured in Germany with top-grade high-quality hardened steel.

The flying dutchman five dozen Scroll Saw Blade Variety Pack comes with five different styles of blades to try and compare. Includes one dozen of each: ur5, ps5, P5, SR5, and nS3 blades in a handy, reusable pouch. Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position. Aggressive with a smooth cut.

Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts. Exclusive tool-free blade clamps allow blade changes in seconds. Flying dutchman scroll saw blades are 5" long and pinless. Milled blades, which makes a sharper cutting edge. Manufactured in Germany with top-grade high-quality hardened steel.

The newly designed new spiral blades are an excellent spiral blade. Flying dutchman scroll saw blades are 5" long and are pinless.


Similar products

---

Flying Dutchman Ultra Reverse Five Dozen Scroll Saw Blade Variety Pack

Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position. Contains 6 each of fr42401, sc41101 and SC41201. Flying dutchman scroll saw blades are 5" long and are pinless. They have a unique design where every third tooth is reversed to prevent splintering on the underside of the project.

These premium blades are made of high carbon steel, hardened and tempered to stay sharp longer. Skip tooth blades cut fast, provide good. Cuts in hard/soft wood and plastic. Exclusive tool-free blade clamps allow blade changes in seconds. The flying dutchman ultra reverse five dozen scroll saw blade Variety Pack comes with one dozen of each of the following sizes: #2/0, #1, #5, #3, and #7.

They also have an aggressively fast cut, while at the same time being a smooth cut. On-off switch, flexible dust blower, electronic variable speed, and blade-tensioning lever all located on front upper arm. Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation.

Double parallel-link arm design dramatically reduces vibration and noise for extremely accurate cuts. Ultra reverse blades are our top selling scroll saw blade. For machines that require 5" pinned blades.


Similar products

---

Olson Saw SC91262BL Scroll Saw Sander with 1/4-Inch Wide Assorted Grits, 4-Pack

Cutting speed and finish depend on material thickness and number of teeth per inch. Available in more sizes than any other type of Olson scroll saw blade. With teeth down both sides of the blade and then twisted, it gives a smoother cut than regular spiral blades. The flying dutchman new spiral five dozen scroll saw blade Variety Pack includes one dozen of each of the following blade sizes: #3/0, #1, #3, #2/0, and #5.

Fox chapel Publishing. The product is manufactured in USA. Flying dutchman scroll saw blades are 5" long and pinless. Milled blades, which makes a sharper cutting edge. Manufactured in Germany with top-grade high-quality hardened steel. The newly designed new spiral blades are an excellent spiral blade. Flying dutchman scroll saw blades are 5" long and pinless.

Milled blades, which makes a sharper cutting edge. Manufactured in Germany with top-grade high-quality hardened steel. The flying dutchman five dozen Scroll Saw Blade Variety Pack comes with five different styles of blades to try and compare. Includes one dozen of each: ur5, and nS3 blades in a handy, PS5, SR5, P5, reusable pouch.

Flying dutchman scroll saw blades are 5" long and pinless.


Similar products