Firecore PEX Tee for Brass Pipe Tubes Fitting Lead-Free 1/2-Inch 3pcs

#ad
#ad
Firecore #ad - Certified for potable water applications NSF 61-G. If you have any questions about the product, please contact us. Material:brass model:pex fitting size:1/2" by 1/2" by 1/2" package include: 3 x Brass PEX tee Firecore provides a high standards of service, we provide 12-month replacement warranty as well as 30-day money back guarantee.

High purity brass, strong corrosion resistance. Firecore provides 12-month warranty and friendly customer service. Lead-free material, safety and environmental protection. Accurate size, suitable for 1/2" PEX tubes.

More information about Firecore #ad

1/2 inch Pex Elbow 1/2" 1/2" pack of 8 Brass Crimp Fitting/Fittings PEX-E-0505

#ad
#ad
VIVO PEX-E-0505 #ad - 1/2" pex Elbow. Made from brass. Brass. Pack of 8 ~ 1/2 Pex Elbow. Compatible with all major brands of 1/2 inch pex tubing. Pack of 8.

More information about VIVO PEX-E-0505 #ad


Similar products



SharkBite UC248LFA10 1/2" 90 Degree Elbow PEX Barb Fitting 10-Pack, Brass

#ad
#ad
SharkBite UC248LFA10 #ad - Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. 1/2" pex Elbow. The sharkbite connection system is perfect for your next commercial or homeowner plumbing project. Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.

10 pack, 1/2", meets the new nsf/ansi standard 14-2009 and astm f 1807-9si standard for products intended for the transport of potable water, or copper crimp rings and crimp tool, for connecting 2 pieces of 1/2" cross link polyethylene pex tubing, immediately Testable To Well Over 100 PSI, Lead Free Brass Barb Insert Elbow, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-933 Cinch Clamps and TV #608-743 Cinch Tool, ANSI/NSF Standard 61 Annex G For Lead Free Compliance and The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.

SharkBite UC248LFA10 1/2" 90 Degree Elbow PEX Barb Fitting 10-Pack, Brass #ad - 25% of lead by weight to meet ab1953 california and VT S152 Vermont Low Lead Restrictions. Brass. Pack of 8. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems.

Affordable: low cost solution to connect PEX Pipe Tubing. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings.

More information about SharkBite UC248LFA10 #ad


Similar products



PEX Pipe Cutters for Cutting 1/8"-1" PEX Tubings, not for PVC Pipes

#ad
#ad
Iwiss Electric Co., Ltd 55045 #ad - Spring loaded handle for quick opening/fast cutting. Cuts pex pipe from 1/8"-1"2. Cuts pex pipes from 1/8"-1". Brass. Makes straight clean burr-frEE Cuts. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. Steel construction for strength3. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection.

The sharkbite connection system is perfect for your next commercial or homeowner plumbing project. Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant. Perfect for the diy home-owner or the professional looking for the perfect way to get started with PEX plumbing.

PEX Pipe Cutters for Cutting 1/8"-1" PEX Tubings, not for PVC Pipes #ad - Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. 1/2" pex Elbow. 1. Do not use to cut metallic pipes or cable wire. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing.

Handle latch keeps tool closedwarnings:always wear approved eye protectionNever use on or near live electrical circuitsDo NOT use to cut metallic pipes or cable wireDo NOT cut cold PEX Pipes Pack of 8.

More information about Iwiss Electric Co., Ltd 55045 #ad


Similar products



Everflow Supplies 615P012-NL Lead Free Pex Full Port Ball Valve with Tee Handle, 1/2-Inch

#ad
#ad
Everflow Supplies 615P012-NL #ad - The sharkbite connection system is perfect for your next commercial or homeowner plumbing project. Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant. Perfect for the diy home-owner or the professional looking for the perfect way to get started with PEX plumbing.

Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. This is a lead free everflow Supplies full port ball valve constructed from forged brass with a chrome plated brass ball. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections.

Everflow Supplies 615P012-NL Lead Free Pex Full Port Ball Valve with Tee Handle, 1/2-Inch #ad - Furthermore, the valve is upc approved and complies with nsf 61-g, with a maximum pressure of 150 psi for saturated Steam and 600 psi wog. Upc approved lead free product for 150 psi steam and 600 psi wog. Do not use to cut metallic pipes or cable wire. Brass Body Constructed. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection.

Working pressure 600 WOG, 150 WSP. In addition, the valve is operated with a handle. Approved by UPC, NSF.

More information about Everflow Supplies 615P012-NL #ad


Similar products



IWISS PEX Clamp Cinch Tool Crimping Tool Crimper for Stainless Steel Clamps from 3/8"to 1" with 1/2" 20PCS and 3/4" 10PCS SS PEX Clamps

#ad
#ad
Iwiss FBA_Iwi-5581 #ad - Spring loaded handle for quick opening/fast cutting. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Iwiss pex clamp cinch tool crimping tool crimper for stainless steel clamps from 3/8" to 1" with 1/2" 20PCS and 3/4" 10PCS SS PEX Clamps IWISS Clamp Cinch Tool is used with Stainless Steel Clamps to make PEX connections.

You can directly use this tool without calibrationit's factory-adjusted, we also offer a calibration tool in case you want to have adjustment after longtime using. Working pressure 600 WOG, 150 WSP. This tool is factory adjusted and we offer a calibration tool in case you want to have adjustment after longtime using.

IWISS PEX Clamp Cinch Tool Crimping Tool Crimper for Stainless Steel Clamps from 3/8"to 1" with 1/2" 20PCS and 3/4" 10PCS SS PEX Clamps #ad - This cinch tool is universal and works with stainless steel clamps of sizes 3/8", 5/8", 1/2", 3/4" and 1". It can be used with any ASTM F2098 stainless steel clamps from any manufacturer. The ratchet safety-function bring fast and reliable installation. Brass Body Constructed. The head part is processed with Wire EDM machine, make sure to provide a precise installation.

Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing.

More information about Iwiss FBA_Iwi-5581 #ad


Similar products



Pexflow PXKT-CR12-50 Oetiker Style Pinch Clamps Pex Cinch Rings, 1/2 INCH, Stainless Steel Pack of 50

#ad
#ad
Everflow Supplies PXKT-CR12-50 #ad - Additionally, although these clamps come in a wide variety of sizes, they use the same type of crimping tool. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. This cinch tool is universal and works with stainless steel clamps of sizes 3/8", 5/8", 1/2", 3/4" and 1".

It can be used with any ASTM F2098 stainless steel clamps from any manufacturer. The ratchet safety-function bring fast and reliable installation. Due to the fact that this ring’s design is so compact, it is perfect for use in tight spaces – including those that a normal crimp tool would not typically reach.

Pexflow PXKT-CR12-50 Oetiker Style Pinch Clamps Pex Cinch Rings, 1/2 INCH, Stainless Steel Pack of 50 #ad - . Adaptability most of the plumbing in the past was made using sweated/compression fittings and copper piping. Pack of 8. To install: use a pex clamp tool or PEX cinch tool which works with PEX clamps up to 1" in size. Brass. Working pressure 600 WOG, 150 WSP. Product details designed for repairing pipes & plumbing system compatible with 1/2 inch pex pipes no-go/no go gauge required to operate uses the pinch/cinch tool Compatible with all PEX brands manufactured to SDR-9 North American standards Not for use with PB tubing Manufactured to ASTM Standard F2098 PRODUCT DESCRIPTION Quality The PEX stainless steel cinch clamps is a high-quality cinch ring designed for use with 1/2 inch PEX pipes.

Universal: these clamps are universal and will work with any brand of crimp style PEX fittings or PEX tubing.

More information about Everflow Supplies PXKT-CR12-50 #ad


Similar products



SharkBite UC334LFA Drop Ear Elbow, 1/2-Inch by 1/2-Inch

#ad
#ad
SharkBite UC334LFA #ad - These fittings can be used in both a stainless steel clamp system, or a copper crimp ring system. Perfect for the diy home-owner or the professional looking for the perfect way to get started with PEX plumbing. 1/2" x 1/2" fnpt lead free used to transition from pex, but have mounting ears with holes for securing to a surface, to npt threaded pipe, such as a stud or wall, and they provide additional stability Can be used in both a stainless steel clamp system, such as shower arms or tub spouts Compatible for potable water distribution and hydronic heating applications NSF CL-R certified for use in hot water systems where chlorinated 140 degree fahrenheit hot water can be constantly re-circulated They are similar to female elbows, or a copper crimp ring system.

Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Everflow part number 615P012-NL. To install: use a pex clamp tool or PEX cinch tool which works with PEX clamps up to 1" in size. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings.

SharkBite UC334LFA Drop Ear Elbow, 1/2-Inch by 1/2-Inch #ad - Meet astm f2098. Resists corrosion and scale build up. 1/2" pex Elbow. Upc approved lead free product for 150 psi steam and 600 psi wog. Do not use to cut metallic pipes or cable wire.

More information about SharkBite UC334LFA #ad


Similar products



1/2-Inch Pex Tubing Combo - 100' Blue 100 Feet Red Flexible Tubing - PEX-B 1/2" 100-Feet Hot & Cold - 200 Feet of Water Polyethylene Tube Pipes - Non-Barrier Flexible Flow Coil Pipe

#ad
#ad
CMI Inc. 1/2-Inch Pex Tubing Combo 100' Blue 100 #ad - 1/2" pex Elbow. Universal: these clamps are universal and will work with any brand of crimp style PEX fittings or PEX tubing. Barb system offers lowest material cost. Resists corrosion and scale build up. Flexipex design: we engineered our premium cross-linked polyethylene pipes to be extremely flexible, copper piping & rigid plumbing supplies freeze, and expandable while reducing the risk of corrosion and freezing water.

This tool is factory adjusted and we offer a calibration tool in case you want to have adjustment after longtime using. Made in usa: stainless steel, Interlocking ring that forms a complete 360-Degree watertight seal. Cuts pex pipes from 1/8"-1". With a nominal diameter of �� ID 0485� od 0625�. 200 feet of pex: we provide you 100 feet of premium pex tubing! you get 100-feet of red and 100-ft of blue pex tubing.

1/2-Inch Pex Tubing Combo - 100' Blue 100 Feet Red Flexible Tubing - PEX-B 1/2" 100-Feet Hot & Cold - 200 Feet of Water Polyethylene Tube Pipes - Non-Barrier Flexible Flow Coil Pipe #ad - Makes straight clean burr-frEE Cuts. Cmi sell all types of pex tubing including �� �� 1� Potable and Oxygen-Barrier Piping. Lead Free Compliant. Perfect for the diy home-owner or the professional looking for the perfect way to get started with PEX plumbing.

More information about CMI Inc. 1/2-Inch Pex Tubing Combo 100' Blue 100 #ad


Similar products



SharkBite 22461LF Barb PEX Ball Valve, 1/2-Inch, Brass

#ad
#ad
SharkBite 22461LF #ad - Universal: these clamps are universal and will work with any brand of crimp style PEX fittings or PEX tubing. Buy more & save More with our spring sale! Spring loaded handle for quick opening/fast cutting. Brass Body Constructed. 1/2" pex Elbow. Perfect for the diy home-owner or the professional looking for the perfect way to get started with PEX plumbing.

Pack of 8. Upc approved lead free product for 150 psi steam and 600 psi wog. Csa b137. 5 standards, nsf cl-r certified for use in hot water systems where chlorinated 140 degree Fahrenheit hot water can be constantly re-circulated. To install: use a pex clamp tool or PEX cinch tool which works with PEX clamps up to 1" in size.

SharkBite 22461LF Barb PEX Ball Valve, 1/2-Inch, Brass #ad - Resists corrosion and scale build up. This cinch tool is universal and works with stainless steel clamps of sizes 3/8", 1/2", 5/8", 3/4" and 1". It can be used with any ASTM F2098 stainless steel clamps from any manufacturer. The ratchet safety-function bring fast and reliable installation. Cuts pex pipes from 1/8"-1".

The sharkbite connection system is perfect for your next commercial or homeowner plumbing project. Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.

More information about SharkBite 22461LF #ad


Similar products



Watts P-960 J-Hook for 1/2-Inch PEX Pipe Support, 100-Pack

#ad
#ad
Watts P-960 #ad - No waiting for glue to dry or joints to cool. For supporting supply and return piping. Size and case pack: compatible with 1/2 Inch PEX Pipes Pack of 50 Pack of 8. Forged brass construction. Upc approved lead free product for 150 psi steam and 600 psi wog. Perfect for the diy home-owner or the professional looking for the perfect way to get started with PEX plumbing.

To install: use a pex clamp tool or PEX cinch tool which works with PEX clamps up to 1" in size. With a nominal diameter of �� ID 0485� od 0625�. 200 feet of pex: we provide you 100 feet of premium pex tubing! you get 100-feet of red and 100-ft of blue pex tubing. Approved by UPC, NSF. Meet astm f2098.

Watts P-960 J-Hook for 1/2-Inch PEX Pipe Support, 100-Pack #ad - Forged brass construction with Chrome Plated Brass ball. Makes straight clean burr-frEE Cuts. Holds pex, copper, cpVC & Polybutylene to floor joists or rafters. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing.

Produces copper pushfit connector fittings and PEX barbed couplings, and more! Be sure to explore the other products that can improve your next plumbing project!

More information about Watts P-960 #ad


Similar products